Welcome
To
Scott Singer
Installations, Inc.
Sales - Service - Installation
Background:
Scott Singer has been a custom installer of Alarms, Stereos, CB Radios, Phone
Systems, Satellite Systems and
other Electrical and Electronics since 1974.He incorporated in 1981 where he
then pursued his talents as a Custom Home
Builder. He also specialized in Remodeling Homes, Condo's, Motor Homes &
Yachts, Scott has been a Custom Cabinet Maker most of his life.
Scott welds, cuts and fabricates steel, aluminum, plastics, fiberglass, solid
surface material, mirrors/ glass, tile, marble, granite, mica products and
wood. This description of his background should help you understand the wide
array of his experience.
This experience comes into play while working on travel trailers and motor homes
as he thinks ahead as he works. Scott Singer Installations, Inc. works on all
types of traveling trailers and coaches from the average to over $1,000,000.
When you hire Scott Singer Installations, Inc. to purchase and install your
satellite (Scott) will personally install your system. You can be assured
that you will get a quality installation every time. Scott will explain how
to properly use your system and let you know where you should be cautious, and
how to secure your system when using a wireless hub. Scott Singer Installations,
Inc. is open 7 days per week and available by appointment 24/7. We are a complete
RV products sales and service center with "on site repairs" and installations
weather permitting.
If you are interested in a MotoSat satellite system for either TV, Internet
or both please "think ahead" and order your system one to two
weeks in advance to when you want it installed. This will allow us to have the
system here and ready to go when you are.
Please feel free to call Scott to discuss your application and possible needs
of satellite equipment.
Products:
Below are pictures of our installation of a MotoSat T2 AutoMotion (solar panels & satellite antenna) on a
class C Motorhome.
Below are pictures of our installation of a MotoSat F-1 Dish with Direcway DataStorm and Dish Network

Scott's Service Truck

Scott's Service Truck
Extra slack in the wires so if there
should be a problem with the connectors at any time the wires can be moved and
new connectors installed. All connectors
have Dielectric Grease to prevent moisture from entering the connection.
This picture is showing
the wires passing through the steel roof. Scott always protects metal or aluminum
surfaces
with a rubber grommet
even though there will be a weather cap filled with sealant to prevent leaks
and wire chaffing.

All connectors have Dielectric Grease
to prevent moisture from entering the connection. Scott has room in the big
loop
of wires should he ever need to replace
the connectors. MotoSat recommends more of a loop within the plate rails
which is how we install a customers equipment.
Notice the sealant over all of the stainless screws through the roof, this
is under the plate only around each screw
and on each hole. It is not recommended to completely seal the plate to the
roof this will only trap the moisture and
create problems. Customers that have equipment and want to move it to another
motor home or trailer can purchase another
mounting plate and wire harness kit from us and have it installed on the new
vehicle. The old plate and wires should
remain with the old unit to protect the roof holes. This would also be a benefit
to
a potential buyer.

Final Installation with wires mounted and weather cover (top right) of picture.
Close this window to return to the main page.